Prg V676 User Manual 3.5 Uživatelský manuál Strana 364

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 444
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 363
346 V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
The coordinates are based on a point of origin (X=0, Y=0, Z=0) from which every object in your 3D graphic has been
located. By defining all three locations, you can achieve an accurate representation of your production in the Graphic
Display window.
+ X - left/right from origin.
+ Y - forward/backward from origin.
+ Z - height from origin.
Note: The Z coordinate (height) sets the top position for the luminaire’s
hook in the 3D graphic. For example, to place a luminaire on a pipe at a
height of 20-0" to the bottom of the pipe, the luminaire should be placed
at 20-2" for accurate placement.
3D Orientation
A fixture’s 3D orientation can be entered in the Orientation section of the Patch dialog at the time the luminaire is
initially patched or any time later.
Guidelines:
+ The Patch display shows the current orientation.
+ The defaults set the orientation to common starting positions.
+ The three angular controls allow adjustment.
Point of Origin
(0,0,0)
X
Y
Z
Zobrazit stránku 363
1 2 ... 359 360 361 362 363 364 365 366 367 368 369 ... 443 444

Komentáře k této Příručce

Žádné komentáře